Deprecated: Assigning the return value of new by reference is deprecated in /home/esfil/public_html/admin/classes/Cores.class.php on line 116

Deprecated: Assigning the return value of new by reference is deprecated in /home/esfil/public_html/admin/classes/Cores.class.php on line 118

Start page Analytical lintid and filters Iodine sorption-filtering tape SFL-2I-50

Iodine sorption-filtering tape SFL-2I-50

The iodine sorption-filtering tape SFL-2I-50 is made of a material FPP with high disperse sorbent and intended for culling hallmarks of aerosols, both vapours of iodine and subsequent measuring of the delayed sediment by radiometric instruments.

The tape SFL-2I-50 represents 3-beds band composed of a friable stratum of ultra thin fibres, into which one is entered impregnated by coal covered from both parties with strata of a tighter material, such as NEL. Edges of the tape are pressure-tight, fastened by calorific welding.

The tape SFL-2I-50 is exhausted in a communal width of 50 mm. Width of a working part without the fastened edges of 40 mm; permissible variation is ±1 mm.

The tape is coiled onto a rigid core with an inside diameter of 20 mm. Length of a tape reeled onto the core is 25-35 m.

The tape SFL-2I-50 can be used as a semi-finished item for fabrication of analytical screens AFAS-I, also contents, intended for definition, radioactive iodine.

The filtering ground (basis) of a tape is hydrophobic, the rack to strong acids, and also alcohols, is diluted in chlorinated hydrocarbons and ketones.

For specialists

Iodine sorption-filtering tape SFL-2I-50


  The naming of indexes N o r m
Group 1 Group 2
1 Resistance of a tape to an air stream at a speed of 1cm/s, Pа 25-55 55-75
2 Penetrations coefficient on an oily fog with a particle radius of 0.15-0.17 ?m at a filtration rate of 10 cm/s, %, no more   1,0   1,0
3 Dynamic capacitance on molecular stable iodine at a speed of 1 cm/s, concentration 2.5 mg/l and penetrations coefficient of iodine of 0.001 %, mg/cm2, not less     0,5     0,5
4 Penetrations coefficient molecular radioactive iodine - 131 at a speed of 5 l/min, initial concentration 1.10-7 –1.10-8 Curie/l, floor space of a sample 3 см2, temperature 18-22°С and iodine–131 capacitance 1.10-5 Curie, %, no more       1,0       1,0
5 Mass of a unit area of a tape, mg/cm2 10-20 10-20
6 Breaking strength of a tape with the reinforced edges, N, not less 50 50

The tape SFL-2I-50 is applied in radiometric instruments to catching and defining the contents of radioactive iodine, counted on exploitation at temperature of environmental and monitored air from 0?С up to +60?С with relative humidity up to 100 % (without formation of a dropped moisture) and the stay (is absent hesitation pumping through a tape of monitored air) at temperature from -50?С up to +65?С at the same limiting value.

The conformity of tapes to the technical requirements within 5 years from the moment of fabrication is guaranteed at observance of conditions of storage and transportation.